Hydraulic pumps

Hydraulic Pump Applications: 8 Industries That Run on Hydraulic Power

From tractors and excavators to refuse trucks and lifts – hydraulic pumps work in most machines that lift, push and dig. See where they are used and which pump type suits which job.

SH 6 min read
Hydraulic pump applications – excavators, tractor, refuse truck and forklift
Table of contents (12)
  1. How a pump works in a hydraulic system
  2. 8 industries where hydraulic pumps work
  3. Which pump type for which job
  4. Pumps for machines in every industry from Frejus

Hydraulics is everywhere something very heavy has to be lifted, pressed, pushed or turned. Without it, an excavator couldn't raise its bucket, a tipper couldn't unload and a tractor couldn't lift a plough. At the heart of every such system is a hydraulic pump. Below we show hydraulic pump applications in eight industries and explain which pump type suits which job.

How a pump works in a hydraulic system #

How a hydraulic system works – drive, pump, control valve, cylinder
The pump turns energy from the engine into oil flow, and the cylinder turns it into movement and force.

A hydraulic pump converts mechanical energy from a combustion engine, an electric motor or a power take-off (PTO) into oil flow. The control valve directs the oil to cylinders or hydraulic motors, which turn it into movement and force. That's how a relatively small pump can move an excavator arm or a tipper body carrying a dozen tonnes or more.

8 industries where hydraulic pumps work #

1. Agriculture #

Combine harvester – hydraulics in agricultural machinery
In a combine, hydraulics controls the header, unloading and often the travel drive. Photo: Wikideas1, Wikimedia Commons (CC0).

The tractor is the hydraulic power source for almost all farm machinery: the three-point hitch, the front loader, power steering and, through quick couplers, tipping trailers, balers, wrappers and spreaders. Hydraulics also works in combines, sprayers and telehandlers. Most of these pumps are gear pumps.

2. Construction #

Crawler excavators on site – hydraulics in construction machinery
Every excavator movement – boom, arm, bucket, slewing – is hydraulic. Photo: Wikideas1, Wikimedia Commons (CC0).

Excavators, loaders, backhoe loaders, rollers and cranes all rely on hydraulic power. Excavators usually use variable displacement piston pumps, because the machine performs several movements at once. Gear pumps dominate in smaller construction machines and attachments.

3. Transport and trucks #

Tipper trailer with the body raised on a telescopic cylinder – hydraulics in transport
A telescopic cylinder raises the tipper body. Photo: Cekay, Wikimedia Commons (CC0).

In trucks, hydraulics raises tipper bodies and drives loader cranes, moving floors and tail lifts. The pump is usually driven by a power take-off on the gearbox.

Truck with a hydraulic loader crane unloading
A loader crane: boom, extension and slewing are all hydraulic cylinders at work. Photo: Fabien Tremoulinas, Wikimedia Commons (CC0).

4. Refuse trucks and recycling #

Refuse truck with hydraulic loader and compactor
A refuse truck: hydraulics lifts the bins and compacts the waste. Photo: Estormiz, Wikimedia Commons (CC0).

Refuse trucks lift bins and compact waste with a hydraulic press. Sorting plants and recycling facilities use balers, shredders and material handlers with grabs.

5. Forklifts, lifts and hoists #

Forklift carried on a truck – hydraulics in transport
A forklift raises the load with hydraulic cylinders in the mast. Photo: Wikideas1, Wikimedia Commons (CC0).

Forklifts raise the mast and tilt the forks hydraulically. Hydraulics also drives hydraulic lifts (elevators), car lifts and loading platforms.

6. Industry #

In factories, hydraulics drives presses, plastic injection moulding machines, metalworking machines, assembly lines and conveyors. Quiet, smooth running matters here, so vane and piston pumps are often used alongside gear pumps.

Plastic injection moulding machine – hydraulics in industry
A plastic injection moulding machine – hydraulics closes the mould and injects the material. Photo: Bricetofly, Wikimedia Commons (CC0).

7. Mining and forestry #

Tracked mobile crusher – hydraulics in mining and recycling
A mobile crusher – hydraulics drives the tracks and sets the jaw. Photo: Alf van Beem, Wikimedia Commons (CC0).

In mines and quarries, hydraulics drives drilling rigs, crushers, mills and heavy loaders. In forestry, harvesters, forwarders and timber cranes need a lot of force in tough conditions.

Harvester head with hydraulic hoses – hydraulics in forestry
A harvester head grips, delimbs and cuts the trunk with hydraulic power. Photo: Kritzolina, Wikimedia Commons (CC0).

8. Energy, aviation and marine #

Hydroelectric plant with a weir – hydraulics in energy
A hydroelectric plant – gates and turbine blades are often moved hydraulically. Photo: Wikideas1, Wikimedia Commons (CC0).

In hydroelectric plants, hydraulic cylinders control gates and turbine blades, and in some wind turbines hydraulics sets the blade pitch and brakes. In aircraft, hydraulics moves the landing gear, flaps and control surfaces, and on ships it drives cranes, winches and the rudder.

Aircraft with landing gear and flaps extended – hydraulics in aviation
Hydraulics extends and retracts an aircraft's landing gear and flaps. Photo: Adrian Pingstone, Wikimedia Commons (public domain).
Supply vessel at an offshore platform with a crane – hydraulics in marine
The platform crane and the supply vessel's winches run on hydraulics. Photo: GuavaTrain, Wikimedia Commons (CC0).

Which pump type for which job #

Hydraulic systems mainly use three types of pumps:

Gear pump design – drive gear and driven gear, suction and pressure side
A gear pump – the most common type in agricultural and construction machinery.
  • Gear pumps: two meshing gears carry oil in the spaces between the teeth and the housing. Simple, robust, tolerant of contamination and the most affordable. Most common in tractors, tippers and smaller machines.
  • Vane pumps: vanes slide out of a rotor and form chambers of changing volume inside a ring. They run quietly and smoothly, which suits industry.
  • Piston pumps: pistons in a cylinder block deliver oil at the highest pressures. They can have variable displacement. Used in excavators, large machines and presses.

You'll find a detailed comparison of pump types in our article on fixed displacement pumps, and buying tips in our guide on how to choose a hydraulic pump.

Pumps for machines in every industry from Frejus #

In our shop you'll find pumps for agricultural and construction machinery, trucks, lifts and forklifts, as well as piston pumps and pump parts. We stock originals and replacements, with popular models available straight away. Not sure which pump fits your machine? Send us the nameplate number or the machine model and we'll match it for you.

Where are hydraulic pumps used?

In agricultural and construction machinery, trucks, refuse trucks, forklifts, lifts, industrial machines, mining, forestry, aviation and energy – wherever a heavy load has to be lifted, pressed or moved.

What is the most common type of hydraulic pump?

The gear pump. It's simple, robust and affordable, so it dominates in tractors, tippers and smaller machines.

What pump is in an excavator?

Most excavators use variable displacement piston pumps, because the machine performs several movements at once. Smaller machines and attachments also use gear pumps.

What does a hydraulic pump do?

It converts mechanical energy from an engine or power take-off into oil flow, which cylinders and hydraulic motors turn into movement and force.

Looking for a pump for your machine? Send us the model or nameplate number and we'll match it for you.

Contact us
Loading...