Hydraulic Pump Flow: Formulas for Flow, Power and Torque
How many litres per minute will a pump deliver, what motor does it need and how fast will the cylinder move? Four simple formulas with step-by-step examples.

Table of contents (11)
The three questions we hear most often from customers:
- “How many litres per minute does this pump deliver?”
- “What electric motor do I need for this pump?”
- “Which pump will make my cylinder move faster?”
Each of them comes down to a simple calculation. You need one number from the pump nameplate: the displacement V (geometric displacement Vg) in cm³/rev. It tells you how much oil the pump moves with one turn of the shaft. Below are the formulas for hydraulic pump flow, drive power, torque and cylinder speed, each with a step-by-step example.

Hydraulic pump flow: how many litres per minute? #
This is the most common question. Flow depends on two things: the size of the pump (displacement V) and the shaft speed (n). A bigger pump at higher speed = more litres.
- Q – flow, how many litres of oil the pump delivers per minute [l/min]
- V – displacement, how many cm³ of oil the pump moves per revolution [cm³/rev] (from the nameplate)
- n – pump shaft speed [rpm]
- ηv – volumetric efficiency, use 0.93 for a new gear pump
In plain words: displacement times speed, divided by 1000 (to convert cm³ to litres), times efficiency. Efficiency tells you how much oil the pump actually delivers. A new pump is around 0.93, which means 93% of the theoretical value. The rest leaks internally through small clearances.
Example: a 16 cm³ pump at 1500 rpm #
- Data: V = 16 cm³/rev, n = 1500 rpm, ηv = 0.93
- 16 × 1500 = 24,000
- 24,000 / 1000 = 24 l/min (theoretical flow)
- 24 × 0.93 = 22.3 l/min
Result: the pump delivers about 22.3 litres of oil per minute.
Why does it matter in practice? Flow determines how fast the cylinder works. Any pump will move a cylinder, but the speed depends on litres per minute. If the cylinder is too slow, you need a pump with a larger displacement or higher speed. We show how to calculate it below, in the cylinder speed formula.
What motor does the pump need? Drive power formula #

You have a pump and want to drive it with an electric motor, for example in a power unit. The motor power depends on the pump size (V), speed (n) and the working pressure (Δp). It's the motor power that decides what pressure the pump can sustain.
- P – motor power needed to drive the pump [kW]
- Δp – working pressure in the system [bar]
- V – displacement [cm³/rev]
- n – speed [rpm]
- ηt – overall efficiency, use 0.85 for a gear pump
Multiply pressure × displacement × speed and divide by 600,000 and by the efficiency. The higher the pressure and the bigger the pump, the more powerful the motor. Overall efficiency is lower than volumetric efficiency because it also includes friction losses in bearings and between parts.
Example: what motor for a 16 cm³ pump at 200 bar? #
- Data: Δp = 200 bar, V = 16 cm³/rev, n = 1500 rpm, ηt = 0.85
- Numerator: 200 × 16 × 1500 = 4,800,000
- Denominator: 600,000 × 0.85 = 510,000
- 4,800,000 / 510,000 = 9.4 kW
Result: you need a motor of at least 9.4 kW. In practice, go one size up, to 11 kW. A power margin means the motor doesn't run at its limit all the time.
What torque is on the pump shaft? Torque formula #
You'll need this formula less often, but it matters when choosing a coupling or a power take-off (PTO). It tells you what torque the pump shaft has to transmit at a given pressure.
- M – torque on the shaft [Nm]
- Δp – working pressure [bar]
- V – displacement [cm³/rev]
- π – 3.14
- ηm – mechanical efficiency, use 0.90
Example: torque on a 16 cm³ pump shaft at 200 bar #
- Data: Δp = 200 bar, V = 16 cm³/rev, ηm = 0.90
- Numerator: 200 × 16 = 3,200
- Denominator: 20 × 3.14 × 0.90 = 56.5
- 3,200 / 56.5 = 56.6 Nm
Result: the pump shaft carries about 56.6 Nm of torque. The coupling and PTO must handle at least that. Choose them with a 15–20% margin.
How fast will the cylinder move? Speed formula #

Cylinder speed depends on two things: how much oil the pump delivers (Q) and how big the piston is (area A). A larger piston needs more oil for the same stroke, so with the same pump it moves slower but pushes harder.
Example: a 22.3 l/min pump and a Ø63 mm piston #
- Piston diameter: 63 mm = 6.3 cm
- A = 3.14 × 6.3² / 4 = 31.2 cm²
- v = 22.3 / (6 × 31.2) = 0.12 m/s
Result: the piston extends at about 0.12 m/s, so a cylinder with a 500 mm stroke extends in about 4.2 seconds. Retracting is faster, because on that side the oil fills a smaller area (the ring around the piston rod).
Pump efficiency: which value to use #
The formulas include the letter η (eta), which stands for efficiency. A pump isn't perfect: some energy is lost to friction and internal leakage. There are three types of efficiency, and each appears in a different formula:
| Efficiency | Value | What it means | Used in |
|---|---|---|---|
| ηv – volumetric | 0.93 (new pump 0.93–0.95) | actual flow compared with theoretical flow | flow |
| ηm – mechanical | 0.90 | friction losses in bearings and seals | torque |
| ηt – overall | 0.85 | both losses together: ηv × ηm = 0.93 × 0.90 ≈ 0.84 | power |
Scroll the table sideways to see all columns.
If you don't know the exact values for your pump, use the ones in the table. For a typical gear pump in good condition they're close enough.
When these formulas come in handy #
- Building a hydraulic power unit: the power formula tells you the minimum kW. Go one motor size up.
- The cylinder is too slow or too fast: the flow and speed formulas tell you which pump you need.
- The pump is ageing: compare actual flow with the calculated value. A big difference = time to replace it.
- Choosing a coupling or PTO: the torque formula tells you how many Nm the connection has to transmit.
- Swapping the pump for a different one: calculate the flow of the old and the new pump. With a replacement, the displacement must match, otherwise the cylinders will behave differently.
Symbols used in the formulas #
| Symbol | Meaning | Unit |
|---|---|---|
| Q | pump flow | l/min |
| V (Vg) | pump displacement | cm³/rev |
| n | shaft speed | rpm |
| Δp | working pressure | bar |
| P | drive motor power | kW |
| M | shaft torque | Nm |
| v | cylinder speed | m/s |
| A | piston area | cm² |
| η | efficiency | – |
Scroll the table sideways to see all columns.
Looking for a pump with a specific flow? Browse pumps for agricultural and construction machinery, piston pumps and hydraulic motors.
How do I calculate hydraulic pump flow?
Displacement [cm³/rev] × speed [rpm] ÷ 1000 × efficiency (about 0.93). A 16 cm³ pump at 1500 rpm delivers about 22.3 l/min.
How do I size a motor for a hydraulic pump?
P [kW] = pressure [bar] × displacement [cm³/rev] × speed [rpm] ÷ (600,000 × 0.85). Round up to the nearest standard motor size.
How do I calculate cylinder speed?
v [m/s] = Q [l/min] ÷ (6 × A [cm²]), where A is the piston area (π × D² / 4).
What efficiency should I use for a gear pump?
Volumetric about 0.93, mechanical about 0.90, overall about 0.85. A worn pump can drop below 0.80 volumetric efficiency.



"European Agricultural Fund for Rural Development: Europe investing in rural areas.” The operation entitled: “Support for the implementation of operations under the community-led local development strategy” under the measure ‘Support for local development under the LEADER initiative’” , aimed at the Development of the enterprise through investment in the construction of a storage hall, which will allow to increase employment and improve the economic performance of the enterprise, is co-financed by the European Union under the measure “Support for local development under the LEADER initiative” of the Rural Development Program 2014-2020