Vane Pump: Design, How It Works, Types and Advantages
A vane pump runs quietly and delivers a smooth flow, which is why you will often find it in power steering, presses and machine tools. We explain how it is built and how it works, how fixed and variable displacement versions differ, and when to choose it over a gear or piston pump.

Table of contents (10)
A hydraulic pump turns the mechanical energy of an engine or electric motor into oil flow that drives cylinders and hydraulic motors. One type is the vane pump. It runs quietly and delivers a very smooth flow, so it is chosen wherever smooth, quiet operation matters. Below we explain how it is built, how it works, what types there are and when it is worth choosing.
What is a vane pump? #

A vane pump is a positive displacement pump: every turn of the shaft moves a fixed amount of oil. It has three main parts:
- the rotor, mounted on the shaft, with radial slots,
- the vanes, flat plates that slide in and out of the rotor slots,
- the cam ring (stator), whose inner surface the vanes slide along.
As the rotor turns, the vanes slide out of their slots and stay in contact with the ring. They are pushed out by centrifugal force and by oil pressure fed under the vanes, and in some designs also by small springs. Two neighbouring vanes, the rotor and the ring form a chamber whose volume changes as the rotor turns.
How does a vane pump work? #

The rotor does not sit exactly in the centre of the ring, so the chambers between the vanes grow on one side and shrink on the other. A vane pump works in three phases:
- Suction. The chambers pass the inlet port and grow. This creates a vacuum that draws oil in from the tank.
- Transfer. A chamber full of oil is sealed between two vanes and turns with the rotor towards the outlet.
- Delivery. The chambers pass the outlet port and shrink, pushing the oil out into the system.
Oil is practically incompressible, so the pump does not “squeeze” anything; it simply carries oil from the inlet to the outlet. Pressure only builds up when the oil meets resistance in the system: a loaded cylinder, a valve or a restriction.
Types of vane pumps #
Vane pumps are classified by two criteria: whether the displacement is fixed or variable, and how many pumping cartridges there are in one housing.
Fixed displacement vane pumps #

They deliver the same amount of oil with every turn of the shaft. Most have an oval cam ring, so during one revolution each chamber draws in and pushes out oil twice. The delivery zones lie opposite each other, so the forces on the shaft cancel out and the bearings run under less load and last longer. This is the most common type of vane pump. Read more in our article on fixed displacement pumps.
Variable displacement vane pumps #

In these pumps the ring is round and can move relative to the rotor. The distance between their centres is the eccentricity. The greater the eccentricity, the more the chamber volume changes and the higher the flow. When the ring is centred on the rotor, flow drops almost to zero.
The ring is usually moved by a pressure compensator. A spring holds the ring in the full-flow position, and system pressure pushes it back. When pressure reaches the set value, the ring centres and the pump delivers only as much oil as the system uses. Less oil passes over the relief valve, so the oil runs cooler and the pump uses less energy. These pumps work well in presses, machine tools and systems where cylinders are held under pressure for long periods.
Single and double vane pumps #

A single pump has one cartridge: the rotor, vanes and ring. It is simple, compact and sufficient for most machines.
A double pump (less often a triple pump) has two cartridges on a common shaft. They usually share one inlet and have separate outlets, so they deliver two independent flows, often of different sizes. This way one motor can feed two circuits. A press is a good example: both sections together give a fast approach, and only the small section works during pressing.
Advantages of vane pumps #

- Quiet operation and smooth flow. There are many chambers working one after another, so pulsation is low. A vane pump is noticeably quieter than an external gear pump.
- Good efficiency. The vanes stay pressed against the ring, so internal leakage is low.
- Automatic wear compensation. As the vane tips wear, the vanes simply slide out a little further, so the pump maintains its output for a long time.
- Easy repair. In many pumps the rotor, vanes, ring and side plates form a ready-made cartridge. It is replaced as a unit, often without removing the housing from the machine.
- Energy savings. A variable displacement pump delivers only as much oil as the system needs.
Vane, gear or piston pump? #

Each pump type has its strengths. In short:
| Gear pump | Vane pump | Piston pump | |
|---|---|---|---|
| Working pressure | medium | medium | high (often above 250 bar) |
| Noise | louder | quiet | quiet to medium |
| Variable displacement | no | yes (selected models) | yes |
| Contamination tolerance | highest | lower | lower |
| Repair | usually replace the pump | replace the cartridge | rebuild in a workshop |
| Price | lowest | medium | highest |
Scroll the table sideways to see all columns.
A gear pump is chosen when low price, simplicity and toughness matter, for example in tractors, tippers and forklifts. A piston pump is used for high pressures and hydrostatic drives in construction and farm machinery. A vane pump is the happy medium: quiet, smooth and easy to repair, ideal for industry and indoor systems.
Where are vane pumps used? #

- power steering in cars, trucks and machines,
- plastic injection moulding machines and hydraulic presses,
- machine tools and production lines,
- hydraulic power units in industrial plants,
- mobile machinery: construction, forestry and municipal.
Vane pumps at Frejus #
In our shop you will find, among other things, the original Vickers V10 vane pump, power steering pumps and hydraulic pump parts. Looking for a specific vane pump? Send us the nameplate number or photos of the pump and we will match an original or a replacement.
How does a vane pump work?
Vanes slide out of a rotating rotor and, together with the ring, form chambers of changing volume. On the inlet side the chambers grow and draw oil in; on the outlet side they shrink and push it into the system.
What is the difference between a fixed and a variable displacement vane pump?
A fixed displacement pump delivers the same amount of oil per revolution. In a variable displacement pump the ring moves relative to the rotor, and changing the eccentricity changes the flow.
Is a vane pump noisy?
No. It runs more quietly than an external gear pump and delivers a very smooth flow. A whine or whistle usually means cavitation at the inlet.
Can a vane pump be repaired?
Yes. In many pumps the rotor, vanes and ring form a replaceable cartridge. It is replaced as a unit and the housing stays in place.
Vane pump or gear pump – which should I choose?
A gear pump is cheaper and more tolerant of contamination. A vane pump is quieter, gives a smoother flow and is easier to repair.
Looking for a vane pump or a cartridge?
Send us the nameplate number or a photo and we will find the right pump.



"European Agricultural Fund for Rural Development: Europe investing in rural areas.” The operation entitled: “Support for the implementation of operations under the community-led local development strategy” under the measure ‘Support for local development under the LEADER initiative’” , aimed at the Development of the enterprise through investment in the construction of a storage hall, which will allow to increase employment and improve the economic performance of the enterprise, is co-financed by the European Union under the measure “Support for local development under the LEADER initiative” of the Rural Development Program 2014-2020