Hydraulic pumps

Fixed Displacement Hydraulic Pump: Types, Advantages and Applications

A fixed displacement hydraulic pump always delivers the same amount of oil at a given speed. We explain how it works, the main types (including gerotor pumps), where it performs best and when a variable displacement pump is the better choice.

SH 7 min read
Fixed Displacement Hydraulic Pump: Types, Advantages and Applications
Table of contents (11)
  1. What is a fixed displacement hydraulic pump?
  2. Types of fixed displacement pumps
  3. Advantages of a fixed displacement pump
  4. Fixed or variable displacement pump?
  5. Where are fixed displacement pumps used?
  6. How to choose a fixed displacement pump
  7. Fixed displacement pumps from Frejus

The fixed displacement pump is the most common pump type in mobile and industrial hydraulics. You will find it in tractors, loaders, tipper trucks, power units and presses. We match these pumps for customers in agriculture, construction and industry every day, so here is everything worth knowing: how they work, the main types, their advantages and when a variable displacement pump makes more sense.

What is a fixed displacement hydraulic pump? #

A fixed displacement pump moves the same volume of oil with every revolution of the shaft. That volume is its displacement, given in cm³/rev, for example 16, 20 or 25 cm³/rev. It cannot be changed without replacing the pump.

In practice, the flow depends only on the drive speed. A 16 cm³/rev pump at 1500 rpm delivers about 22 l/min, and at 2000 rpm about 30 l/min. System pressure does not change that. The pump only supplies the oil, and pressure builds up when the oil meets resistance, such as a cylinder lifting a load. We show the calculation step by step in our article on hydraulic pump flow.

A variable displacement pump, by contrast, can change the amount of oil it delivers, for example reducing flow when the system does not need full power. It uses a controller that changes the pump geometry during operation.

On hydraulic schematics, a fixed displacement pump is shown as a circle with a solid triangle pointing outwards (the flow direction). A variable displacement pump has an additional diagonal arrow through the circle, which indicates that it can be adjusted.

Types of fixed displacement pumps #

Several pump designs offer fixed displacement. They differ in pressure rating, noise level, price and typical use.

Gear pumps (external gear) #

The most popular pumps in mobile machinery. Two gears rotate in opposite directions and carry oil in the spaces between the teeth and the housing. They are simple, robust, affordable and widely available. You will find them in tractors, front loaders, tipper trucks, cranes and power units. They are the most common choice when a pump in a work machine needs replacing.

Gerotor pumps (internal gear) #

A gerotor pump is a type of internal gear pump. It has two elements: an inner gear mounted on the drive shaft and an outer ring gear with internal teeth, which has one tooth more. Both rotate in the same direction, but their axes are offset (eccentric). As a result, the chambers between the teeth repeatedly expand (drawing oil in) and shrink (pushing it out). Every revolution moves the same volume of oil, so it is a classic fixed displacement pump.

Gerotor pumps are compact, run quietly and smoothly with low flow pulsation, and have good suction. They also have few parts, which helps durability. They usually work at lower pressures than external gear or piston pumps, so you will most often find them as charge pumps in hydrostatic transmissions, lubrication pumps in gearboxes and engines, in power steering systems and in small power units. Orbital motors and steering units (orbitrols) work on the same principle, using a gerotor or geroler set.

Fixed displacement vane pumps #

Vanes fitted in a rotor press against a cam ring and form chambers of changing volume. Vane pumps run quietly and evenly, which is why they are often used in industrial machinery, presses and machine tools, where low noise matters.

Fixed displacement piston pumps #

The pistons work in a cylinder block set at a fixed angle (for example bent-axis pumps such as the Bosch Rexroth A2FO). These pumps handle the highest pressures and offer high efficiency, but they cost more than gear pumps. They are used where high pressure at constant flow is needed, for example in construction and industrial machine drives. We also regenerate worn piston pumps in our own service workshop.

Advantages of a fixed displacement pump #

  • Simple design and lower price. No controllers, sensors or displacement adjustment mechanisms. Fewer parts mean a lower purchase price, often several times lower than a variable displacement pump of similar size.
  • Reliability and durability. Fewer components mean fewer things that can fail. Gear and gerotor pumps cope well with dust, frost and heavy loads, which is why they dominate in agricultural and construction machinery.
  • Predictable flow. At a given speed the pump always delivers the same litres per minute. That makes it easier to design the system, size the cylinders and predict how fast they will move.
  • Easier servicing and parts availability. Fixed displacement pumps, especially gear pumps, are standardised (groups, flanges, shafts). A replacement or spare parts are easy to find, and swapping a pump usually takes a few hours.
  • Good efficiency under steady load. If the system needs a similar flow most of the time, such as a fan drive, a conveyor or a cyclic press, a fixed displacement pump works efficiently and wastes no energy on regulation.
Watch outA fixed displacement pump delivers oil all the time, even when the cylinders are not moving. The excess oil returns to the tank through the relief valve, and at high pressure that energy turns into heat. If the system often runs over relief, the oil overheats and wears the pump and seals faster.

Fixed or variable displacement pump? #

Fixed displacement pumpVariable displacement pump
Flowconstant at a given speedadjustable during operation
Designsimplecomplex (controller, swashplate)
Pricelowerhigher
Servicingsimpler, parts easy to findrequires a specialist
Energy losseswith changing load, excess flow goes over relieflow, the pump delivers only what is needed
Typical usetractors, loaders, tipper trucks, power units, pressesexcavators, machines running several functions at once, Load Sensing systems

Scroll the table sideways to see all columns.

A variable displacement pump (usually an axial piston pump) pays off where oil demand changes a lot, for example in an excavator that sometimes stands idle and sometimes digs, slews and travels at the same time. If the machine works at a fairly steady load and simplicity and cost matter, a fixed displacement pump is the better choice.

Where are fixed displacement pumps used? #

How to choose a fixed displacement pump #

When replacing a pump, the easiest way is to use the part number from the nameplate. If there is no nameplate, you need to establish a few parameters:

  • Displacement [cm³/rev], which is how much oil the pump delivers per revolution.
  • Working and maximum pressure [bar].
  • Direction of rotation: clockwise or anticlockwise, viewed from the shaft end.
  • Shaft and flange type: tapered, splined, keyed shaft, mounting hole spacing.
  • Ports: threads or flanges for the inlet and outlet.

Not sure which pump you need? Send us the part number from the nameplate or photos of the pump and we will find the right one for you.

Fixed displacement pumps from Frejus #

Our shop offers more than 40,000 hydraulic products, including gear, gerotor, vane and piston pumps, both original parts and replacements. We keep popular models in stock at our warehouse in Siedlisko, Poland, and we also supply pump spare parts.

What is a fixed displacement pump?

It is a pump that moves the same volume of oil with every revolution of the shaft. Its flow changes only with the drive speed, not with system pressure.

What is the difference between a fixed and a variable displacement pump?

A variable displacement pump has a controller and can change the amount of oil it delivers during operation. A fixed displacement pump is simpler and cheaper, but excess oil is returned through the relief valve.

Is a gear pump a fixed displacement pump?

Yes. Gear pumps, both external gear and gerotor types, are fixed displacement pumps.

Where are gerotor pumps used?

Most often as charge pumps in hydrostatic transmissions, lubrication pumps, in power steering systems and in small power units. They run quietly with low flow pulsation.

How do I calculate the flow of a fixed displacement pump?

Displacement [cm³/rev] × speed [rpm] ÷ 1000 × efficiency (about 0.93). A 16 cm³ pump at 1500 rpm delivers about 22.3 l/min.

Looking for a fixed displacement pump?

Send us the nameplate number and we will match the right pump.

Contact us
Loading...